Plating and Metal Finishing
Products
Penguin Series PX Extended Sealless Vertical Pumps
Penguin Series PX extended sealless vertical immersible pumps feature an all-plastic, CPVC design to thrive handling acids, alkalines and other corrosives. Standard motors are three phase, totally enclosed and fan cooled. Long-wearing bearing is easy to replace. Click on the model number needed or to find out the model needed, use the selector menu below. Choose the max flow up to 250 with max head 115, then the motor HP. Call or chat for free guidance!
$3,241.12 – $7,358.32 Select options
Sethco P90 Sealless High-Power Motors
The Sethco P90 motor by itself works with the Sethco P90 drum pumps. Choose from three, different, high-powered motors that empty entire drums in less than two minutes. Motor only.
$614.42 – $949.14 Select options
Wilden 1-inch P2 Series Metal Pump Kits
Wilden 1-inch P Series Metal Pump Kits feature genuine Wilden parts. Choose the standard repair kit with diaphragms, pilot sleeve assembly, valve balls, valve seat o-rings and more or select a series of upgrades for superior performance and extended service life. For free guidance on selecting the ideal kit, call or chat!
$376.37 – $1,488.65 Select options
Finish Thompson SP Series Self-Priming Pumps
Finish Thompson SP Series self-priming pumps are offered in a wide range of specifications to suit your wet process. Pumps are ideal for pumping liquids from pits, tanks, railcars, and tanker trucks to bulk storage, process and day tanks, and for other applications too difficult for ordinary centrifugal pumps. Click on the model number or to find out the model needed, use the selector menu to choose from polypropylene or PVDF, the max head and max flow, and the sizes of the suction, discharge and impeller. Or call for free guidance!
$1,367.12 – $4,337.80 Select options
Flux Pumps F Series Motors
Flux Pumps F Series motors are offered in a wide range of specifications featuring double shell housings, superior ventilation, corrosion resistance, explosion-proof designs and more. Click on the model number or to find out the model needed, use the selector menu to choose the type of air or electric motor, variable speed drive, and capacity. Or call or chat for free guidance!
$799.00 – $1,144.92 Select options
Penguin Series CB Filter Bag Chambers
Penguin Series CB filter bag chambers deliver high volume surface filtration down to one micron. Choose from four different sizes to accommodate a wide range of requirements such as pressure, temperature, cost and more. Featuring an all-CPVC design, just click on the model number or to find out the model needed or use the selector menu to choose the filter bag size and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!
$1,202.70 – $2,028.25 Select options
Process Technology DE Series Digital Combination Controls
Process Technology DE20 Series digital thermostats improve process control in temperatures ranging from zero - 500 degrees F. Comes with LED display, Fluoropolymer (FEP) covered, 10-foot (3m), 1000-ohm, platinum RTD sensor in corrosion-resistant enclosure. Click on the model number or to find out the model needed, use the selector menu. Or call or chat for free guidance!
$1,225.00 – $2,499.00 Select options
Process Technology DLC Series Digital Combination Controls
Process Technology DLC Series digital thermostats improve process control in temperatures ranging from minus 58 - 302 degrees F. Comes with LED display, Fluoropolymer (FEP) covered, 10-foot (3m), 1000-ohm, platinum RTD sensor in corrosion-resistant enclosure. Click on the model number or to find out the model needed, use the selector menu. Or call or chat for free guidance!
$1,019.20 – $2,402.96 Select options
Process Technology DQ Series Digital Combination Controls
Process Technology DQ Series digital thermostats operate in temperatures ranging from minus zero - 500 degrees F. Comes with Fluoropolymer (FEP) covered, 10-foot (3m), 1000-ohm, platinum RTD sensor as standard and more. Click on the model number or to find out the model needed, use the selector menu. Or call or chat for free guidance!
$1,474.90 – $2,688.14 Select options
Process Technology DSL Series Digital Combination Controls
Process Technology DSL Series digital thermostats improve process control in temperatures ranging from minus 100 - 500 degrees F. Comes with LED display, Fluoropolymer (FEP) covered, 10-foot (3m), 1000-ohm, platinum RTD sensor in corrosion-resistant enclosure. Click on the model number or to find out the model needed, use the selector menu. Or call or chat for free guidance!
$1,653.26 – $3,046.82 Select options
Sethco 500 Series Magnetic Drive End Suction Pumps
Sethco 500 Series Magnetic Drive End Suction Pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the type of motor. Or call or chat for free guidance! These Sethco pumps are ideal for highly corrosive or mild chemicals, acids or solvents and more and are the frequent choice in water, wastewater, agriculture and aquatic systems.
$1,544.40 – $2,586.76 Select options
Wilden 1-inch P2 Series Plastic Pump Kits
Wilden 1-inch P Series Plastic Pump Kits feature genuine Wilden parts. Choose the standard repair kit with diaphragms, pilot sleeve assembly, valve balls and more or select a series of upgrades for superior performance and extended service life. For free guidance on selecting the ideal kit, call or chat!
$396.93 – $1,731.19 Select options
Wilden Metal Pumps T4, P4, 1.5-Inch
Wilden 1.5-inch, air-operated, double-diaphragm (AODD) metal pumps in the P4, T4 and PX4 Original Series provide the durability, chemical-resistance, abrasion-resistance and temperature range required in a variety of demanding process applications. P4 and T4 flow rate to 81 GPM, PX4 to 87 GPM, with maximum operating pressure at 125 PSI. Choose the elastomer based on its temperature limit:
Buna 10 - 180 degrees F
Neoprene 0 - 200
PTFE 40 - 300
Wil-Flex minus 40 - 225
$1,404.10 – $2,387.35 Select options
Finish Thompson PF Series Drum Pumps – High Flow
Finish Thompson PF series drum pumps deliver high performance in container-to-container fluid transfer. These powered, portable FTI drum pumps feature a unique double suction impeller that provides high flow and high head for the safe, easy transfer of a wide range of acids, bases, plating solutions and more. Please note: drum pumps and motors are sold separately.
$410.55 – $1,305.60 Select options
Penguin Series CT Carbon Treatment Chambers
Penguin Series CT carbon treatment chambers come in more than 20 styles and configurations to accommodate a wide range of requirements such as pressure, temperature, carbon capacity, cost and more. Click on the model number or to find out the model needed use the selector menu to choose from CPVC, polypropylene or PVDF, the number and type of carbon bags and flow rate, and the inlet/outlet connections. Or call or chat for free guidance!
$1,246.40 – $2,893.70 Select options
Sethco 500 Series Magnetic Drive Self-Priming Pumps
Sethco 500 Series magnetic drive self-priming pumps are offered in a wide range of specifications. Click on the model number or to find out the model needed use the selector menu. Choose from glass-reinforced polypropylene or PVDF, the motor phase, max flow and max head, and the motor HP. Or call or chat for free guidance! These Sethco pumps are ideal for pumping, transferring and filtering acids, caustics, bleaches and more and are the frequent choice in water, wastewater, agriculture and aquatic sysems.
$1,938.15 – $4,376.17 Select options
